Sancon specializes in through-hole and SMD conductive polymer aluminum solid capacitors. The products are widely used in motherboards, DC-DC converters, switching power supplies, mobile energy storage devices, QC protocol phone chargers, PD protocol chargers and other products.

FH Series

Sancon’s FH High-Temperature Series is suitable for motherboards, DC-DC converters, switching power supplies, QC protocol phone chargers, PD protocol chargers and other products. Rated for 125°C, it fits compact, high-power scenarios, especially compact PD fast chargers with high power of 100W~240W+. The products are stable and reliable.

Sancon’s FE Series is suitable for motherboards, VGA, DC-DC converters, switching power supplies, QC protocol phone chargers, PD protocol chargers and other products.

The above is the datasheet for Sancon’s FE Series. This series complies with RoHS standards and is manufactured under lead-free specifications to meet modern environmental requirements. The capacitance ranges from 27 to 2700 uF, operating temperature from -55°C to +105°C, and rated voltage from 10 to 100 V DC. It is guaranteed to have a service life of 2000 hours at an operating temperature of 105°C. The products have passed the endurance test at +105°C with rated voltage applied for 2000 hours, as well as the high-temperature storage test, in which samples are stored without load for 1000 hours at 105°C±2°C and then tested after the temperature returns to 20°C.

EV Series

The EV Series is a high-voltage SMD conductive polymer aluminum solid capacitor under Nantong Sancon. In addition to two SMD models, Chargerlab also obtained four through-hole models, as shown in the figure above. The EV Series complies with RoHS standards and is manufactured under lead-free specifications to meet modern environmental requirements. The capacitance ranges from 22 to 2200 uF, operating temperature from -55°C to +105°C, and rated voltage from 10 to 100 V DC. It is guaranteed to have a service life of 2000 hours at an operating temperature of 105°C.

The above is the datasheet for Sancon’s EV Series. The products can pass the endurance test at 105°C with rated voltage applied for 2000 hours, and the high-temperature storage test where samples are stored without load for 1000 hours at 105°C±2°C and then tested after the temperature returns to 20°C.