Anker releases the Black Myth co-branded Prime 220W power bank (model A110G), with a capacity of 20,000mAh, supporting up to 220W output.

Equipped with 2C1A interfaces, both C ports support blind insertion 140W PD3.1 EPR output, and the A port has a maximum of 22.5W. Supports 100W self-charging, taking about 88 minutes to fully charge using a 100W charger, with the temperature rising only 7°C during the charging process.

Supports simultaneous charging and discharging, with a built-in intelligent chip that can dynamically allocate power. It offers three modes: intelligent, long-life, and custom. You can connect via the app to check battery level, temperature, health status, and update the firmware.

The screen allows customizable brightness, screen lock time, and display content, supporting low-current mode and Pomodoro timer functions. Actual tests show 140W output can last 18 minutes, 100W lasts 34 minutes and 14 seconds, and under high temperatures, power automatically reduces to 65W for protection.

The ripple performance is good, with 105mV at the 140W setting. The accessories include a 240W EPR data cable and a co-branded storage bag.

After opening the back cover, the two motherboards are stacked, with a large amount of thermal paste filled in between. The battery consists of 6 18650 lithium cells connected in series for power supply.

The battery is a SunPower 18650 high-capacity battery, with a capacity of 3400mAh, arranged in a series of 6 cells.

The lower board is the battery management BMS board, which manages and balances the battery, as well as the position of the C2 port.

The upper board is an output board for ports A and C1, and the output capacitors are two SANCON EV type 35V 150μF solid-state chip capacitors. This model of capacitors has excellent performance with small size and high ripple current tolerance, ensuring lower output ripple.